We pride ourselves on customer satisfaction. We rely highly on word of mouth advertising. This has served us well in the valley of the sun for years. We offer free estimates. There is no job too big or too small, and we'll give you the quality you're looking for. Each customer is given our complete attention. We respect the need for your questions to be answered, and we work very hard to do just that. We're a company that will "go the extra mile" to keep our customers happy. Our goal at Almeida Roofing Inc. is not only to have complete customer satisfaction, but to be referred by that customer to another. Our quality work is proof that we are reaching that goal. We offer prompt estimates and courteous service.
Frequently Asked Questions
I hate the color of my shingles. Can I paint them?
Yes, you can but it's not advisable. Shingles lose their granules over time. What you can easily wind up with is a splotchy looking roof. Keep them painted every few years though and you will be okay, Another thing, shingles are made so that there are variations in coloring. With a painted roof, there will be no variations. It will be all one color.
The roofer didn't remove the little plastic strip from the back of my shingles. Should this have been removed?
No, it does not need to be removed. That particular brand of shingle is designed so that the sealant seals right through the strip. The strip is there to help keep the shingles from sticking together before they're installed.
My shingles got beat up in the last hail storm we had and I'm tired of replacing them. What type of roof should I use?
If the hail is big enough, then it won't matter what you use, the material will still get destroyed. There are some shingles that can take quite a hit and remain in good shape. There are SBS Modified asphalt shingles made by Malarkey Roofing. These shingles have a class iv hail rating which is the highest hail rating available. You can also look into metal, but be careful. We've all seen the hoods of cars after quarter-sized hail storms.
What's the minimum slope I need to install asphalt shingles?
Don't go lower than 2:12 which means two inches of vertical rise for every twelve inches of horizontal run. Anything between 2:12 and 4:12, you should consider installing two layers of #15 felt underlayment, reducing the exposure of the shingle - the exposure being the part of the shingle that remains visible after installation, or both. In lieu of both of these, you may want to install a self-adhering ice and water underlayment over the entire deck surface.
What kind of felt underlayment should I use?
Felt paper is a vapor barrier plus keeps the oils in the shingles from leeching out and into the wood substrate ( i.e. plywood or OSB roof deck), so #15, 20, or 30 will work for any shingle roof. The type I recommend depends on roof shape.
For slopes less than 4/12, I recommend 2 layers of #15. Helps reduce the possibility of leaks. The felt overlaps in " shingle fashion".
Slopes 4/12 to 6/12, I recommend one layer of #15 or #20.
Slopes greater than 6/12 I recommend one layer of #30. The steeper the slope, the easier it is to slip and tear the felt. #30 is heavier so on steeper slopes, you don't slip and tear it as easily.